The K25 optical level switches are designed for use in level monitoring for controlling the oil or liquid CO2 flow in transcritical or sub critical applications.
They have bodies made of stainless steel and sensor dome made of glass.
They are economical, dependable, and compact in size with overall dimensions of 90 x 36 mm and have no moving parts.
They not only sense the level but also measure the temperature of the liquid via 4-20mA output.

These level switches use infrared technology for their operation.
They consist of an infrared emitter and an optical receiver. They have an operating temperature range of -40 to 125 deg C.
There is a programmable timer inside these K25 optical level switches that allows a delay time to be set for delaying the output switching.
The output modes are normally closed in presence of liquids and open in air or vice versa.
The DC digital output current is up to 50mA depending on model and the temperature output is 4-20mA analogue current output

These level switches must not be installed close to any infrared sources.
The dome must be at least 50mm away from any reflective surface.
They have electronic protection against transient over voltage and reverse polarity.
The K25 optical level switches have a detection accuracy of +/- 2 mm.
They can withstand maximum pressure of 150 bars.

Temperature (°C)	Current (mA)	Voltage (mV)(*)
-40	4	400
-30	5	500
-20	6	600
-10	7	700
0	8	800
10	9	900
20	10	1000
30	11	1100
40	12	1200
50	13	1300
60	14	1400
70	15	1500
80	16	1600
90	17	1700
100	18	1800
110	19	1900
120	20	2000